iPhone 7 Plus Front Panel Clips

iPhone 7 Plus Front Panel Clips

• Replace the set of six retaining clips in the edges of the rear case.
• Set includes two small clips and four large clips.
• These clips help hold the front panel assembly in place.

iPhone 7/7 Plus Test Cable for Front Camera and Sensors

• This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
• Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
• With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.

iPhone 7 Plus Wi-Fi Diversity Antenna

This Wi-Fi Diversity and cable is adhered to the loudspeaker in the lower right corner inside the rear case.

Specifications:

iPhone 7 Plus Dual Rear Camera

If the camera assembly has sensor issues, problems focusing, or is malfunctioning, you'll want to replace this part.

Note: If your photos look like you have a scratched lens, this part will not solve the issue. The lens opening in your rear case may be scratched.

iPhone 7/7 Plus Test Cable for Audio Control Cable

• This handy test cable makes it easy to check the functions of an audio control and power button cable assembly without having to complete the installation.
• Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
• With this cable installed you can connect, test, and quickly swap multiple replacement audio control and power button cable assemblies without wearing out the delicate press fit connector on the logic board.

iPhone 7 Plus Case Button Set

• This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
• These parts are only the button faces visible on the outside of the case.
• The actual buttons and switch that do all the work are attached to the internal button cables.