iPhone 7/7 Plus Hold Switch Gasket

iPhone 7/7 Plus Hold Switch Gasket

Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly.

iPhone 7/7 Plus Test Cable for Home Button

• This handy test cable makes it easy to check the function of a home button assembly without having to complete the installation.
• Indispensable to anyone who makes multiple iPhone 7 and 7 Plus repairs.
• With this cable installed in an iPhone 7 or 7 Plus body you can connect, test, and quickly swap multiple replacement home button assemblies without wearing out the delicate press fit connector on the logic board.

iPhone 7 Bare Logic Board

• This is only the board to which all the surface soldered components would be mounted.
• There are two revision numbers for this logic board. This board is 820-00188-A.

iPhone 7 Case Button Set

• This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
• These are the button parts visible on the outside of the case.
• The actual buttons and switch that do all the work are attached to the internal button cables.

iPhone 7 Front Panel Assembly Cable Bracket

This metal bracket secures the connectors from the LCD and digitizer as well as the battery cable to the logic board.

iPhone 7 Top Right Antenna

• Replace a torn or missing antenna contact assembly in the top right of the rear case in your iPhone 7.
• Fix Wi-Fi connectivity problems.