| SKU | iPhone 7/7 Plus Power/Volume Button Retaining Clips | iPhone 7/7 Plus SIM Card Slot/Reader | iPhone 7/7 Plus Lightning Connector Grounding Spring Contact | iPhone 7 Bare Logic Board | iPhone 7/7 Plus Button Retaining Clips | iPhone 7/7 Plus Test Cable for Audio Control Cable |
| Description | Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. |
- Replace a corroded or bent SIM card reader slot and save a logic board from e-waste. This component is surface soldered to the the logic board.
- The SIM card tray is not included.
|
Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket in your iPhone 7 or iPhone 7 Plus. | Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
|
- Replace the internal clips that hold the external button covers in place.
- These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
- Set of three clips.
|
- This handy test cable makes it easy to check the functions of an audio control and power button cable assembly without having to complete the installation.
- Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement audio control and power button cable assemblies without wearing out the delicate press fit connector on the logic board.
|
| Content | iPhone 7/7 Plus Power/Volume Button Retaining Clips
Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. | iPhone 7/7 Plus SIM Card Slot/Reader
- Replace a corroded or bent SIM card reader slot and save a logic board from e-waste. This component is surface soldered to the the logic board.
- The SIM card tray is not included.
| iPhone 7/7 Plus Lightning Connector Grounding Spring Contact
Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket in your iPhone 7 or iPhone 7 Plus. | iPhone 7 Bare Logic Board
Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
| iPhone 7/7 Plus Power/Volume Button Retaining Clips
- Replace the internal clips that hold the external button covers in place.
- These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
- Set of three clips.
| iPhone 7/7 Plus Test Cable for Audio Control Cable
- This handy test cable makes it easy to check the functions of an audio control and power button cable assembly without having to complete the installation.
- Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement audio control and power button cable assemblies without wearing out the delicate press fit connector on the logic board.
|
Reviews
There are no reviews yet.