| Description |
- Replace the cable that connects the internal volume buttons, vibrate/ring switch, and power button to the logic board of your iPhone 13 mini. In addition, this cable includes the Wireless Charging Antenna Coil.
- Fix issues with volume adjustment, vibration, and cordless charging.
Note: The external button covers are not included. | Replace a malfunctioning 8 megapixel rear-facing camera in your iPhone 5s.
If your rear camera has sensor issues, focusing problems, or shows a blank image, you’ll want to replace this part. | Specifications:
| Watt Hours |
5.73 Wh |
| Voltage |
3.8 V |
| Milliamp Hours |
1510 mAh |
| Manufacturer |
Aftermarket |
| Compatible Part Numbers |
616-0667, 616-0668, 616-0669, 616-0730, 616-0762, 661-8300, |
| This iPhone 5s screen replacement includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your repair.
- New parts tested to strict quality standards.
- 100% factory tested for display performance, including luminance and color balance.
Replace a cracked or scratched front glass panel or malfunctioning LCD display on your iPhone 5s. A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display. | Replace the captive phillips screw, spring contact, and adhesive backing from the home button assembly compatible with an iPhone 5s or 1st generation SE. | Replace a torn or missing Bluetooth/Wi-Fi Antenna in your iPhone 5s or 1st generation iPhone SE and fix unreliable connections to Wi-Fi and Bluetooth service.
If you are experiencing connectivity issues and have a damaged or malfunctioning antenna, replacing this part may make the fix. |
| Content | iPhone 13 mini Audio Control Cable and Wireless Charging Antenna
- Replace the cable that connects the internal volume buttons, vibrate/ring switch, and power button to the logic board of your iPhone 13 mini. In addition, this cable includes the Wireless Charging Antenna Coil.
- Fix issues with volume adjustment, vibration, and cordless charging.
Note: The external button covers are not included. | iPhone 5s Rear Camera
Replace a malfunctioning 8 megapixel rear-facing camera in your iPhone 5s.
If your rear camera has sensor issues, focusing problems, or shows a blank image, you’ll want to replace this part.
Note: If you have a scratched lens in the rear case, this part will not solve your issue.
Specifications:
| Compatible Part Numbers |
923-0652, 821-1592-06 |
| iPhone 5c Battery
This replacement battery is what you need to bring that dead smartphone back to life.
- This battery is brand new! Each one has been tested to confirm that there are no cycles on the cell and that the capacity is 95% or higher.
Note: For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Specifications:
| Watt Hours |
5.73 Wh |
| Voltage |
3.8 V |
| Milliamp Hours |
1510 mAh |
| Manufacturer |
Aftermarket |
| Compatible Part Numbers |
616-0667, 616-0668, 616-0669, 616-0730, 616-0762, 661-8300, |
| iPhone 5s Screen
This iPhone 5s screen replacement includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your repair.
- New parts tested to strict quality standards.
- 100% factory tested for display performance, including luminance and color balance.
Replace a cracked or scratched front glass panel or malfunctioning LCD display on your iPhone 5s. A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display.
Note: The Touch ID function will only work with your phone's original home button assembly. This replacement part does not include the home button. You will need to transfer the button assembly from your old display to retain Touch ID. | iPhone 5s/SE (1st Gen) Home Button Spring Contact Backing
Replace the captive phillips screw, spring contact, and adhesive backing from the home button assembly compatible with an iPhone 5s or 1st generation SE.
| iPhone 5s/SE (1st Gen) Bluetooth and Wi-Fi Antenna
Replace a torn or missing Bluetooth/Wi-Fi Antenna in your iPhone 5s or 1st generation iPhone SE and fix unreliable connections to Wi-Fi and Bluetooth service.
If you are experiencing connectivity issues and have a damaged or malfunctioning antenna, replacing this part may make the fix. |
Reviews
There are no reviews yet.