iPhone 7 Plus Dual Rear Camera Lens Cover

$7.00

Replace the external lens covers for the dual rear-facing cameras in your iPhone 7 Plus.

Note: Removal of this part requires breaking spot welds between the lens cover bezel and the internal camera bracket. This is a difficult task. Be sure to review all of the replacement guide before attempting this repair.

SKU: iPhone 7 Plus Dual Rear Camera Lens Cover Category:

Description

iPhone 7 Plus Dual Rear Camera Lens Cover

Replace the external lens covers for the dual rear-facing cameras in your iPhone 7 Plus.

Note: Removal of this part requires breaking spot welds between the lens cover bezel and the internal camera bracket. This is a difficult task. Be sure to review all of the replacement guide before attempting this repair.

Additional information

iPhone 7 Plus Parts

IPhones Repair Parts

Reviews

There are no reviews yet.

Be the first to review “iPhone 7 Plus Dual Rear Camera Lens Cover”

Your email address will not be published. Required fields are marked *

Quick Comparison

iPhone 7 Plus Dual Rear Camera Lens Cover removeiPhone 7 Plus Lightning Connector Assembly removeiPhone 7/7 Plus Test Cable for Front Camera and Sensors removeiPhone 6s/6s Plus/7/7 Plus Bottom Screws removeiPhone 7/7 Plus Power/Volume Button Retaining Clips removeiPhone 7 Plus Bare Logic Board remove
NameiPhone 7 Plus Dual Rear Camera Lens Cover removeiPhone 7 Plus Lightning Connector Assembly removeiPhone 7/7 Plus Test Cable for Front Camera and Sensors removeiPhone 6s/6s Plus/7/7 Plus Bottom Screws removeiPhone 7/7 Plus Power/Volume Button Retaining Clips removeiPhone 7 Plus Bare Logic Board remove
ImageiPhone 7 Plus Dual Rear Camera Lens CoveriPhone 7 Plus Lightning Connector AssemblyiPhone 7/7 Plus Test Cable for Front Camera and SensorsiPhone 6s/6s Plus/7/7 Plus Bottom ScrewsiPhone 7/7 Plus Power/Volume Button Retaining ClipsiPhone 7 Plus Bare Logic Board
SKUiPhone 7 Plus Dual Rear Camera Lens CoveriPhone 7 Plus Lightning Connector AssemblyiPhone 7/7 Plus Test Cable for Front Camera and SensorsiPhone 6s/6s Plus/7/7 Plus Bottom ScrewsiPhone 7/7 Plus Power/Volume Button Retaining ClipsiPhone 7 Plus Bare Logic Board
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Price$7.00$27.00$11.00$8.00$4.00$11.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionReplace the external lens covers for the dual rear-facing cameras in your iPhone 7 Plus. Note: Removal of this part requires breaking spot welds between the lens cover bezel and the internal camera bracket. This is a difficult task. Be sure to review all of the replacement guide before attempting this repair.

Replace a corroded or damaged lightning connector in your iPhone 7 Plus.

If your phone isn't charging, has connectivity problems, is not recognized when plugged into your computer via USB, or has trouble recording audio, this part could fix the problem. Specifications:
Part Number 821-00276-05
  • This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
  • Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
  • With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.

Includes two replacement screws.

Replace the internal clips that hold the external button covers in place. These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case. Set of three clips.Replace a bare logic board (with no components) for the iPhone 7 Plus.

This is only the board to which all the surface soldered components would be mounted.

Content

iPhone 7 Plus Dual Rear Camera Lens Cover

Replace the external lens covers for the dual rear-facing cameras in your iPhone 7 Plus. Note: Removal of this part requires breaking spot welds between the lens cover bezel and the internal camera bracket. This is a difficult task. Be sure to review all of the replacement guide before attempting this repair.

iPhone 7 Plus Lightning Connector Assembly

Replace a corroded or damaged lightning connector in your iPhone 7 Plus.

If your phone isn't charging, has connectivity problems, is not recognized when plugged into your computer via USB, or has trouble recording audio, this part could fix the problem. Specifications:
Part Number 821-00276-05

iPhone 7/7 Plus Test Cable for Front Camera and Sensors

 
  • This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
  • Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
  • With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.

iPhone 6s/6s Plus/7/7 Plus Bottom Screws

All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.

Includes two replacement screws.

iPhone 7/7 Plus Power/Volume Button Retaining Clips

Replace the internal clips that hold the external button covers in place. These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case. Set of three clips.

iPhone 7 Plus Bare Logic Board

Replace a bare logic board (with no components) for the iPhone 7 Plus.

This is only the board to which all the surface soldered components would be mounted.

WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
iPhone 7 Plus Parts

IPhones Repair Parts

iPhone 7 Plus Parts

IPhones Repair Parts

iPhone 7 Parts

iPhone 7 Plus Parts

IPhones Repair Parts

iPhone 6s Plus Parts

IPhones Repair Parts

iPhone 6s Parts

iPhone 7 Parts

iPhone 7 Plus Parts

iPhone 7 Parts

IPhones Repair Parts

iPhone 7 Plus Parts

IPhones Repair Parts

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare