| SKU | iPhone 7/7 Plus Test Cable for Rear Camera | iPhone 6s/6s+/7 Backlight Driver LM3539 | iPhone 7 Front Camera and Sensor Cable | iPhone 6s/6s Plus/7/7 Plus Bottom Screws | iPhone 7/7 Plus SIM Card Slot/Reader | iPhone 7/7 Plus Hold Switch Gasket |
| Description | This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time. | Replace a LM3539 backlight driver on the logic board of the following iPhone models with their component labels:
- iPhone 6s U4020 or U4050
- iPhone 6s Plus U4020 or U4050
- iPhone 7 U370
Note: Are you learning to microsolder or starting your own board level repair business? This component is included in the Board Component Bundle. | Replace a front-facing camera and sensor cable in your iPhone 7 and fix problems with front-facing camera images, poor noise cancelling for phone calls, or malfunctioning screen brightness adjustment.
- Components of this cable assembly have the part numbers 821-00379 and 821-00514.
Specifications:
| All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.
Includes two replacement screws. |
- Replace a corroded or bent SIM card reader slot and save a logic board from e-waste. This component is surface soldered to the the logic board.
- The SIM card tray is not included.
|
Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly. |
| Content | iPhone 7/7 Plus Test Cable for Rear Camera
This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time. | iPhone 6s/6s+/7 Backlight Driver LM3539
Replace a LM3539 backlight driver on the logic board of the following iPhone models with their component labels:
- iPhone 6s U4020 or U4050
- iPhone 6s Plus U4020 or U4050
- iPhone 7 U370
Note: Are you learning to microsolder or starting your own board level repair business? This component is included in the Board Component Bundle. | iPhone 7 Front Camera and Sensor Cable
Replace a front-facing camera and sensor cable in your iPhone 7 and fix problems with front-facing camera images, poor noise cancelling for phone calls, or malfunctioning screen brightness adjustment.
- Components of this cable assembly have the part numbers 821-00379 and 821-00514.
Specifications:
| iPhone 6s/6s Plus/7/7 Plus Bottom Screws
All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.
Includes two replacement screws. | iPhone 7/7 Plus SIM Card Slot/Reader
- Replace a corroded or bent SIM card reader slot and save a logic board from e-waste. This component is surface soldered to the the logic board.
- The SIM card tray is not included.
| iPhone 7/7 Plus Hold Switch Gasket
Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly. |
Reviews
There are no reviews yet.