iPhone 7/7 Plus Power/Volume Button Retaining Clips

$4.00

Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone’s case.
Set of three clips.

SKU: iPhone 7/7 Plus Power/Volume Button Retaining Clips Categories: ,

Description

iPhone 7/7 Plus Power/Volume Button Retaining Clips

Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone’s case.
Set of three clips.

Additional information

iPhone 7 Parts

IPhones Repair Parts

Reviews

There are no reviews yet.

Be the first to review “iPhone 7/7 Plus Power/Volume Button Retaining Clips”

Your email address will not be published. Required fields are marked *

Quick Comparison

iPhone 7/7 Plus Power/Volume Button Retaining Clips removeiPhone 7/7 Plus Hold Switch Gasket removeiPhone 7 Bare Logic Board removeiPhone 6s/6s Plus/7/7 Plus Backlight Filter removeiPhone 7/7 Plus Test Cable for Rear Camera removeiPhone 7 Case Button Set remove
NameiPhone 7/7 Plus Power/Volume Button Retaining Clips removeiPhone 7/7 Plus Hold Switch Gasket removeiPhone 7 Bare Logic Board removeiPhone 6s/6s Plus/7/7 Plus Backlight Filter removeiPhone 7/7 Plus Test Cable for Rear Camera removeiPhone 7 Case Button Set remove
ImageiPhone 7/7 Plus Power/Volume Button Retaining ClipsiPhone 7/7 Plus Hold Switch GasketiPhone 8 plus Bare Logic BoardiPhone 6s/6s Plus/7/7 Plus Backlight FilteriPhone 7/7 Plus Test Cable for Rear CameraiPhone 7 Case Button Set
SKUiPhone 7/7 Plus Power/Volume Button Retaining ClipsiPhone 7/7 Plus Hold Switch GasketiPhone 7 Bare Logic BoardiPhone 6s/6s Plus/7/7 Plus Backlight FilteriPhone 7/7 Plus Test Cable for Rear CameraiPhone 7 Case Button Set
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Price$4.00$1.05$16.00$4.00$11.00$11.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionReplace the internal clips that hold the external button covers in place. These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case. Set of three clips. 

Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly.

Replace a bare logic board (with no components) for the iPhone 7.
  • This is only the board to which all the surface soldered components would be mounted.
  • There are two revision numbers for this logic board. This board is 820-00188-A.

Replace a backlight filter on the logic board of the following iPhone models with their component labels:

  • iPhone 6s and iPhone 6s Plus
    • FL4211
    • FL4212
    • FL4213
    • FL4291
    • FL4292
    • FL4293
  • iPhone 7 and iPhone 7 Plus
    • FL3902
    • FL3903
Are you learning to micro solder or starting your own board level repair business? This component is included in the Board Component Bundle.

This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.

  • Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
  • With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time.
  • This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
  • These are the button parts visible on the outside of the case.
  • The actual buttons and switch that do all the work are attached to the internal button cables.
Content

iPhone 7/7 Plus Power/Volume Button Retaining Clips

Replace the internal clips that hold the external button covers in place. These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case. Set of three clips.

iPhone 7/7 Plus Hold Switch Gasket

Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly.

iPhone 7 Bare Logic Board

Replace a bare logic board (with no components) for the iPhone 7.
  • This is only the board to which all the surface soldered components would be mounted.
  • There are two revision numbers for this logic board. This board is 820-00188-A.

iPhone 6s/6s Plus/7/7 Plus Backlight Filter

Replace a backlight filter on the logic board of the following iPhone models with their component labels:

  • iPhone 6s and iPhone 6s Plus
    • FL4211
    • FL4212
    • FL4213
    • FL4291
    • FL4292
    • FL4293
  • iPhone 7 and iPhone 7 Plus
    • FL3902
    • FL3903
Are you learning to micro solder or starting your own board level repair business? This component is included in the Board Component Bundle.

iPhone 7/7 Plus Test Cable for Rear Camera

This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.

  • Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
  • With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time.

iPhone 7 Case Button Set

  • This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
  • These are the button parts visible on the outside of the case.
  • The actual buttons and switch that do all the work are attached to the internal button cables.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
iPhone 7 Parts

IPhones Repair Parts

iPhone 7 Parts

IPhones Repair Parts

iPhone 7 Parts

IPhones Repair Parts

iPhone 6s Plus Parts

IPhones Repair Parts

iPhone 6s Parts

iPhone 7 Parts

iPhone 7 Plus Parts

iPhone 7 Parts

iPhone 7 Plus Parts

IPhones Repair Parts

iPhone 7 Parts

IPhones Repair Parts

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare