| SKU | iPhone 7/7 Plus Power and Volume Button Gaskets | iPhone 7 Audio Control Cable and Brackets | iPhone 7/7 Plus Button Retaining Clips | iPhone 7 Bare Logic Board | iPhone 7 Lightning Connector Assembly | iPhone 7 Wi-Fi Diversity Antenna |
| Description | Includes 6 gaskets.
Replace any or all of this set of six o-ring gaskets for the power or volume button face posts in an iPhone 7 or iPhone 7 Plus.
Each of the volume button faces and the power button face have two posts that extend to the interior of the phone. Each post has a tiny gasket. That makes six gaskets for one phone or two for each button face. | This cable connects the volume buttons, vibrate/ring switch, and power button to the logic board.
The metal button brackets are included.
Specifications:
|
- Replace the internal clips that hold the external button covers in place.
- These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
- Set of three clips.
| Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
| Replace a corroded or damaged lightning connector assembly in your iPhone 7.
If your phone isn't charging, has connectivity problems, is not recognized when plugged into your computer via USB, or has trouble recording audio, this part could fix the problem.
Specifications:
| Replace a torn or missing Wi-Fi Diversity Antenna in your iPhone 7 and fix unreliable connections to Wi-Fi signal.
This Wi-Fi antenna and cable is adhered to the loudspeaker in the lower right corner inside the rear case.
Specifications:
|
| Content | iPhone 7/7 Plus Power and Volume Button Gaskets
Includes 6 gaskets.
Replace any or all of this set of six o-ring gaskets for the power or volume button face posts in an iPhone 7 or iPhone 7 Plus.
Each of the volume button faces and the power button face have two posts that extend to the interior of the phone. Each post has a tiny gasket. That makes six gaskets for one phone or two for each button face. | iPhone 7 Audio Control Cable and Brackets
This cable connects the volume buttons, vibrate/ring switch, and power button to the logic board.
The metal button brackets are included.
Specifications:
| iPhone 7/7 Plus Power/Volume Button Retaining Clips
- Replace the internal clips that hold the external button covers in place.
- These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
- Set of three clips.
| iPhone 7 Bare Logic Board
Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
| iPhone 7 Lightning Connector Assembly
Replace a corroded or damaged lightning connector assembly in your iPhone 7.
If your phone isn't charging, has connectivity problems, is not recognized when plugged into your computer via USB, or has trouble recording audio, this part could fix the problem.
Specifications:
| iPhone 7 Wi-Fi Diversity Antenna
Replace a torn or missing Wi-Fi Diversity Antenna in your iPhone 7 and fix unreliable connections to Wi-Fi signal.
This Wi-Fi antenna and cable is adhered to the loudspeaker in the lower right corner inside the rear case.
Specifications:
|
Reviews
There are no reviews yet.