iPhone 7 Plus Bare Logic Board

iPhone 7 Plus Bare Logic Board

This is only the board to which all the surface soldered components would be mounted.

iPhone 7/7 Plus Test Cable for Rear Camera

This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.

• Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
• With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.

iPhone 7 Plus Case Button Set

• This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
• These parts are only the button faces visible on the outside of the case.
• The actual buttons and switch that do all the work are attached to the internal button cables.

iPhone 7 Plus Wi-Fi Diversity Antenna

This Wi-Fi Diversity and cable is adhered to the loudspeaker in the lower right corner inside the rear case.

Specifications:

iPhone 7 Plus Dual Rear Camera

If the camera assembly has sensor issues, problems focusing, or is malfunctioning, you'll want to replace this part.

Note: If your photos look like you have a scratched lens, this part will not solve the issue. The lens opening in your rear case may be scratched.

iPhone 7 Plus Battery

• This battery is brand new! Each one has been tested to confirm that there are no cycles on the cell and that the capacity is 95% or higher.