iPhone 7 Plus Bare Logic Board

iPhone 7 Plus Bare Logic Board

This is only the board to which all the surface soldered components would be mounted.

iPhone 7 Plus Front Panel Assembly Cable Bracket

This metal bracket secures the connectors from the LCD and digitizer as well as the battery cable to the logic board.

iPhone 7 Plus Case Button Set

• This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
• These parts are only the button faces visible on the outside of the case.
• The actual buttons and switch that do all the work are attached to the internal button cables.

iPhone 7 Plus Audio Control Cable and Brackets

• This cable connects the volume buttons, vibrate/ring switch, and power button to the logic board.
• The metal button brackets are included.

iPhone 7/7 Plus Hold Switch Gasket

Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly.

iPhone 7 Plus Front Panel Clips

• Replace the set of six retaining clips in the edges of the rear case.
• Set includes two small clips and four large clips.
• These clips help hold the front panel assembly in place.