| SKU | iPhone 7 Plus Audio Control Cable and Brackets | iPhone 7 Plus Top Center Antenna Cable | iPhone 7/7 Plus Power/Volume Button Retaining Clips | iPhone 7 Plus Dual Rear Camera Lens Cover | iPhone 7/7 Plus Test Cable for Front Camera and Sensors | iPhone 7 Plus Bare Logic Board |
| Description |
- This cable connects the volume buttons, vibrate/ring switch, and power button to the logic board.
- The metal button brackets are included.
Specifications:
| Replace the antenna cable in the top center of the rear case in your iPhone 7 Plus smartphone. | Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. | Replace the external lens covers for the dual rear-facing cameras in your iPhone 7 Plus.
Note: Removal of this part requires breaking spot welds between the lens cover bezel and the internal camera bracket. This is a difficult task. Be sure to review all of the replacement guide before attempting this repair. |
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
| Replace a bare logic board (with no components) for the iPhone 7 Plus.
This is only the board to which all the surface soldered components would be mounted. |
| Content | iPhone 7 Plus Audio Control Cable and Brackets
- This cable connects the volume buttons, vibrate/ring switch, and power button to the logic board.
- The metal button brackets are included.
Specifications:
| iPhone 7 Plus Top Center Antenna Cable
Replace the antenna cable in the top center of the rear case in your iPhone 7 Plus smartphone. | iPhone 7/7 Plus Power/Volume Button Retaining Clips
Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. | iPhone 7 Plus Dual Rear Camera Lens Cover
Replace the external lens covers for the dual rear-facing cameras in your iPhone 7 Plus.
Note: Removal of this part requires breaking spot welds between the lens cover bezel and the internal camera bracket. This is a difficult task. Be sure to review all of the replacement guide before attempting this repair. | iPhone 7/7 Plus Test Cable for Front Camera and Sensors
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
| iPhone 7 Plus Bare Logic Board
Replace a bare logic board (with no components) for the iPhone 7 Plus.
This is only the board to which all the surface soldered components would be mounted. |
Reviews
There are no reviews yet.