iPhone 7/7 Plus Test Cable for Rear Camera

$11.00

This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone’s case.

  • Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
  • With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.

Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time.

SKU: iPhone 7/7 Plus Test Cable for Rear Camera Categories: ,

Description

iPhone 7/7 Plus Test Cable for Rear Camera

This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone’s case.

  • Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
  • With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.

Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time.

Additional information

iPhone 7 Parts

iPhone 7 Plus Parts

IPhones Repair Parts

Reviews

There are no reviews yet.

Be the first to review “iPhone 7/7 Plus Test Cable for Rear Camera”

Your email address will not be published. Required fields are marked *

Quick Comparison

iPhone 7/7 Plus Test Cable for Rear Camera removeiPhone 7 Bare Logic Board removeiPhone 7/7 Plus Power and Volume Button Gaskets removeiPhone 7/7 Plus Power/Volume Button Retaining Clips removeiPhone 7 Top Right Antenna removeiPhone 7 Case Button Set remove
NameiPhone 7/7 Plus Test Cable for Rear Camera removeiPhone 7 Bare Logic Board removeiPhone 7/7 Plus Power and Volume Button Gaskets removeiPhone 7/7 Plus Power/Volume Button Retaining Clips removeiPhone 7 Top Right Antenna removeiPhone 7 Case Button Set remove
ImageiPhone 7/7 Plus Test Cable for Rear CameraiPhone 8 plus Bare Logic BoardiPhone 7/7 Plus Power and Volume Button GasketsiPhone 7/7 Plus Power/Volume Button Retaining ClipsiPhone 7 Top Right AntennaiPhone 7 Case Button Set
SKUiPhone 7/7 Plus Test Cable for Rear CameraiPhone 7 Bare Logic BoardiPhone 7/7 Plus Power and Volume Button GasketsiPhone 7/7 Plus Power/Volume Button Retaining ClipsiPhone 7 Top Right AntennaiPhone 7 Case Button Set
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Price$11.00$16.00$9.00$4.00$5.00$11.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description

This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.

  • Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
  • With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time.
Replace a bare logic board (with no components) for the iPhone 7.
  • This is only the board to which all the surface soldered components would be mounted.
  • There are two revision numbers for this logic board. This board is 820-00188-A.
Includes 6 gaskets.

Replace any or all of this set of six o-ring gaskets for the power or volume button face posts in an iPhone 7 or iPhone 7 Plus.

Each of the volume button faces and the power button face have two posts that extend to the interior of the phone. Each post has a tiny gasket. That makes six gaskets for one phone or two for each button face.

Replace the internal clips that hold the external button covers in place. These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case. Set of three clips.
  • Replace a torn or missing antenna contact assembly in the top right of the rear case in your iPhone 7.
  • Fix Wi-Fi connectivity problems.
  • This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
  • These are the button parts visible on the outside of the case.
  • The actual buttons and switch that do all the work are attached to the internal button cables.
Content

iPhone 7/7 Plus Test Cable for Rear Camera

This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.

  • Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
  • With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time.

iPhone 7 Bare Logic Board

Replace a bare logic board (with no components) for the iPhone 7.
  • This is only the board to which all the surface soldered components would be mounted.
  • There are two revision numbers for this logic board. This board is 820-00188-A.

iPhone 7/7 Plus Power and Volume Button Gaskets

Includes 6 gaskets.

Replace any or all of this set of six o-ring gaskets for the power or volume button face posts in an iPhone 7 or iPhone 7 Plus.

Each of the volume button faces and the power button face have two posts that extend to the interior of the phone. Each post has a tiny gasket. That makes six gaskets for one phone or two for each button face.

iPhone 7/7 Plus Power/Volume Button Retaining Clips

Replace the internal clips that hold the external button covers in place. These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case. Set of three clips.

iPhone 7 Top Right Antenna

  • Replace a torn or missing antenna contact assembly in the top right of the rear case in your iPhone 7.
  • Fix Wi-Fi connectivity problems.

iPhone 7 Case Button Set

  • This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
  • These are the button parts visible on the outside of the case.
  • The actual buttons and switch that do all the work are attached to the internal button cables.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
iPhone 7 Parts

iPhone 7 Plus Parts

IPhones Repair Parts

iPhone 7 Parts

IPhones Repair Parts

iPhone 7 Parts

iPhone 7 Plus Parts

iPhone 7 Parts

IPhones Repair Parts

iPhone 7 Parts

IPhones Repair Parts

iPhone 7 Parts

IPhones Repair Parts

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare