| SKU | iPhone 7/7 Plus Test Cable for Front Camera and Sensors | iPhone 6s/6s Plus/7/7 Plus Bottom Screws | iPhone 7/7 Plus Power/Volume Button Retaining Clips | iPhone 6s/6s+/7 Backlight Driver LM3539 | iPhone 7 Wi-Fi Diversity Antenna | iPhone 7 Front Panel Clips |
| Description |
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
| All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.
Includes two replacement screws. | Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. | Replace a LM3539 backlight driver on the logic board of the following iPhone models with their component labels:
- iPhone 6s U4020 or U4050
- iPhone 6s Plus U4020 or U4050
- iPhone 7 U370
Note: Are you learning to microsolder or starting your own board level repair business? This component is included in the Board Component Bundle. | Replace a torn or missing Wi-Fi Diversity Antenna in your iPhone 7 and fix unreliable connections to Wi-Fi signal.
This Wi-Fi antenna and cable is adhered to the loudspeaker in the lower right corner inside the rear case.
Specifications:
|
- Replace the set of three retaining clips in the edges of the rear case.
- These clips help hold the front panel assembly in place.
|
| Content | iPhone 7/7 Plus Test Cable for Front Camera and Sensors
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
| iPhone 6s/6s Plus/7/7 Plus Bottom Screws
All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.
Includes two replacement screws. | iPhone 7/7 Plus Power/Volume Button Retaining Clips
Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. | iPhone 6s/6s+/7 Backlight Driver LM3539
Replace a LM3539 backlight driver on the logic board of the following iPhone models with their component labels:
- iPhone 6s U4020 or U4050
- iPhone 6s Plus U4020 or U4050
- iPhone 7 U370
Note: Are you learning to microsolder or starting your own board level repair business? This component is included in the Board Component Bundle. | iPhone 7 Wi-Fi Diversity Antenna
Replace a torn or missing Wi-Fi Diversity Antenna in your iPhone 7 and fix unreliable connections to Wi-Fi signal.
This Wi-Fi antenna and cable is adhered to the loudspeaker in the lower right corner inside the rear case.
Specifications:
| iPhone 7 Front Panel Clips
- Replace the set of three retaining clips in the edges of the rear case.
- These clips help hold the front panel assembly in place.
|
Reviews
There are no reviews yet.