| SKU | iPhone 7/7 Plus Power/Volume Button Retaining Clips | iPhone 7/7 Plus SIM Card Slot/Reader | iPhone 7 Bare Logic Board | iPhone 7 Top Left Antenna | iPhone 7/7 Plus Hold Switch Gasket | iPhone 7/7 Plus Test Cable for Rear Camera |
| Description | Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. |
- Replace a corroded or bent SIM card reader slot and save a logic board from e-waste. This component is surface soldered to the the logic board.
- The SIM card tray is not included.
| Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
|
Replace a torn or missing antenna contact assembly in the top left of the rear case of your iPhone 7 and fix cellular connectivity problems. |
Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly. | This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time. |
| Content | iPhone 7/7 Plus Power/Volume Button Retaining Clips
Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. | iPhone 7/7 Plus SIM Card Slot/Reader
- Replace a corroded or bent SIM card reader slot and save a logic board from e-waste. This component is surface soldered to the the logic board.
- The SIM card tray is not included.
| iPhone 7 Bare Logic Board
Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
| iPhone 7 Top Left Antenna
Replace a torn or missing antenna contact assembly in the top left of the rear case of your iPhone 7 and fix cellular connectivity problems. | iPhone 7/7 Plus Hold Switch Gasket
Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly. | iPhone 7/7 Plus Test Cable for Rear Camera
This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time. |
Reviews
There are no reviews yet.