| SKU | iPhone 7/7 Plus Hold Switch Gasket | iPhone 6s/6s Plus/7/7 Plus Backlight Filter | iPhone 7 Front Camera and Sensor Cable | iPhone 7 Bare Logic Board | iPhone 7 Front Panel Clips | iPhone 7/7 Plus Test Cable for Front Camera and Sensors |
| Description |
Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly. | Replace a backlight filter on the logic board of the following iPhone models with their component labels:
- iPhone 6s and iPhone 6s Plus
- FL4211
- FL4212
- FL4213
- FL4291
- FL4292
- FL4293
- iPhone 7 and iPhone 7 Plus
Are you learning to micro solder or starting your own board level repair business? This component is included in the Board Component Bundle. | Replace a front-facing camera and sensor cable in your iPhone 7 and fix problems with front-facing camera images, poor noise cancelling for phone calls, or malfunctioning screen brightness adjustment.
- Components of this cable assembly have the part numbers 821-00379 and 821-00514.
Specifications:
| Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
|
- Replace the set of three retaining clips in the edges of the rear case.
- These clips help hold the front panel assembly in place.
|
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
|
| Content | iPhone 7/7 Plus Hold Switch Gasket
Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly. | iPhone 6s/6s Plus/7/7 Plus Backlight Filter
Replace a backlight filter on the logic board of the following iPhone models with their component labels:
- iPhone 6s and iPhone 6s Plus
- FL4211
- FL4212
- FL4213
- FL4291
- FL4292
- FL4293
- iPhone 7 and iPhone 7 Plus
Are you learning to micro solder or starting your own board level repair business? This component is included in the Board Component Bundle. | iPhone 7 Front Camera and Sensor Cable
Replace a front-facing camera and sensor cable in your iPhone 7 and fix problems with front-facing camera images, poor noise cancelling for phone calls, or malfunctioning screen brightness adjustment.
- Components of this cable assembly have the part numbers 821-00379 and 821-00514.
Specifications:
| iPhone 7 Bare Logic Board
Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
| iPhone 7 Front Panel Clips
- Replace the set of three retaining clips in the edges of the rear case.
- These clips help hold the front panel assembly in place.
| iPhone 7/7 Plus Test Cable for Front Camera and Sensors
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
|
Reviews
There are no reviews yet.