| SKU | iPhone 7/7 Plus Test Cable for Front Camera and Sensors | iPhone 7/7 Plus SIM Card Tray Gasket | iPhone 7 Wi-Fi Diversity Antenna | iPhone 7/7 Plus Test Cable for Rear Camera | iPhone 6/6s/7 Backlight Diode | iPhone 7/7 Plus Button Retaining Clips |
| Description |
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
| Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus. This gasket fits just inside the exterior face of the SIM card tray. | Replace a torn or missing Wi-Fi Diversity Antenna in your iPhone 7 and fix unreliable connections to Wi-Fi signal.
This Wi-Fi antenna and cable is adhered to the loudspeaker in the lower right corner inside the rear case.
Specifications:
| This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time. | Replace a backlight diode on the logic board of the following iPhone models with their component labels:
- iPhone 6 D1501
- iPhone 6s D4020
- iPhone 7 D3702
Are you learning to microsolder or starting your own board level repair business? This component is included in the Board Component Bundle. |
- Replace the internal clips that hold the external button covers in place.
- These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
- Set of three clips.
|
| Content | iPhone 7/7 Plus Test Cable for Front Camera and Sensors
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
| iPhone 7/7 Plus SIM Card Tray Gasket
Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus. This gasket fits just inside the exterior face of the SIM card tray. | iPhone 7 Wi-Fi Diversity Antenna
Replace a torn or missing Wi-Fi Diversity Antenna in your iPhone 7 and fix unreliable connections to Wi-Fi signal.
This Wi-Fi antenna and cable is adhered to the loudspeaker in the lower right corner inside the rear case.
Specifications:
| iPhone 7/7 Plus Test Cable for Rear Camera
This handy test cable makes it easy to check the functions of a rear-facing camera in an iPhone 7 or iPhone 7 Plus without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement rear-facing cameras without wearing out the delicate press fit connectors on the logic board.
Note: This cable fits the connectors for the main and secondary rear-facing cameras in a iPhone 7 Plus, but one cable can only test one camera at a time. | iPhone 6/6s/7 Backlight Diode
Replace a backlight diode on the logic board of the following iPhone models with their component labels:
- iPhone 6 D1501
- iPhone 6s D4020
- iPhone 7 D3702
Are you learning to microsolder or starting your own board level repair business? This component is included in the Board Component Bundle. | iPhone 7/7 Plus Power/Volume Button Retaining Clips
- Replace the internal clips that hold the external button covers in place.
- These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
- Set of three clips.
|
Reviews
There are no reviews yet.