| SKU | iPhone 7/7 Plus Test Cable for Front Camera and Sensors | iPhone 6s/6s Plus/7/7 Plus Bottom Screws | iPhone 7 Bare Logic Board | iPhone 7 Wi-Fi Diversity Antenna | iPhone 7/7 Plus/8/8 Plus Replacement Home Button | iPhone 7/7 Plus Power/Volume Button Retaining Clips |
| Description |
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
| All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.
Includes two replacement screws. | Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
| Replace a torn or missing Wi-Fi Diversity Antenna in your iPhone 7 and fix unreliable connections to Wi-Fi signal.
This Wi-Fi antenna and cable is adhered to the loudspeaker in the lower right corner inside the rear case.
Specifications:
| Replace a home button assembly in your iPhone 7/7 Plus/8/8 Plus and fix an unresponsive home button. | Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. |
| Content | iPhone 7/7 Plus Test Cable for Front Camera and Sensors
- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
| iPhone 6s/6s Plus/7/7 Plus Bottom Screws
All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.
Includes two replacement screws. | iPhone 7 Bare Logic Board
Replace a bare logic board (with no components) for the iPhone 7.
- This is only the board to which all the surface soldered components would be mounted.
- There are two revision numbers for this logic board. This board is 820-00188-A.
| iPhone 7 Wi-Fi Diversity Antenna
Replace a torn or missing Wi-Fi Diversity Antenna in your iPhone 7 and fix unreliable connections to Wi-Fi signal.
This Wi-Fi antenna and cable is adhered to the loudspeaker in the lower right corner inside the rear case.
Specifications:
| iPhone 7/7 Plus/8/8 Plus Replacement Home Button
Replace a home button assembly in your iPhone 7/7 Plus/8/8 Plus and fix an unresponsive home button. | iPhone 7/7 Plus Power/Volume Button Retaining Clips
Replace the internal clips that hold the external button covers in place.
These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
Set of three clips. |
| Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.