iPhone 7/7 Plus/8/8 Plus Replacement Home Button

iPhone 7/7 Plus/8/8 Plus Replacement Home Button

Replace a home button assembly in your iPhone 7/7 Plus/8/8 Plus and fix an unresponsive home button.

iPhone 8/8 Plus Cellular Antenna Connector

• Replace corroded, bent, or missing contact wires with a new antenna cable connector in your iPhone 8 or 8 Plus and save a logic board from e-waste.
• This component is one of 5 cable connectors surface soldered to the lower end of the logic board.

iPhone 8 Lightning Connector Assembly

If your phone isn't charging, has connectivity problems, is not recognized when plugged into your computer via USB, or has trouble recording audio, this part could fix the problem.

Specifications:

iPhone 8 Wi-Fi Diversity Antenna

This antenna is adhered to the loudspeaker in the lower right corner inside the rear case.

Specifications:

iPhone 8 Battery

• 100% factory tested with a customer return rate of only 1%.
• Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
• Spot tested by iFixit staff in San Luis Obispo, CA to ensure consistency of quality and capacity.
• Assembled using high quality chipset from Texas Instruments.
• Battery adhesive is preinstalled to improve the quality of your repair.

Battery degradation is an inevitable part of your iPhone's lifespan, extend it with this new replacement battery compatible with 8. If your iPhone 8 won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.

Note: For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.

iPhone 8 Case Button Set

• This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
• These are the button parts visible on the outside of the case.
• The actual buttons and switch that do all the work are attached to the internal button cables.