| Description | Replace punctured or missing mesh covering the earpiece speaker opening in your iPhone 12, iPhone 12 mini, iPhone 12 Pro, or iPhone 12 Pro Max.
Keep dust and dirt from blocking the earpiece speaker.
Note: Installation adhesive is not included. | Replace a scratched or cracked front panel glass digitizer screen or a malfunctioning Super Retina XDR OLED display. This part is compatible with an iPhone 12 mini.
- New parts tested to strict quality standards.
- 100% factory tested for display performance, including luminance and color balance.
- A 5.4 inch OLED multitouch 2340 x 1080 display featuring active-matrix organic light-emitting diode (AMOLED) technology; a significant improvement over more standard liquid crystal displays (LCD). This screen measures up closest to the original OLED display specifications.
A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display. | Replace a broken or scratched rear panel with this new blank aftermarket rear panel.
Note:
- The rear-facing camera bezels and lens covers are not included.
- Replacing this panel requires removing the spot welded rear-facing camera bezels.
| This iPhone 12 mini replacement battery is what you need to bring your dead iPhone back to life!
- Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
- 100% factory tested with a customer return rate of only 1%.
- Assembled using high quality chipset from Texas Instruments.
- Battery adhesive is preinstalled to improve the quality of your repair.
Battery degradation is an inevitable part of the lifespan of your iPhone 12 mini. Extend the life of your phone with this new replacement battery. If your iPhone 12 mini won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.
For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Note: After replacing your battery the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than Battery Health not reporting the health of the battery.
Specifications:
| Battery Model # |
A2471 |
| Watt Hours |
8.57 Wh |
| Voltage |
3.85 V |
| Milliamp Hours |
2227 mAh |
| Replace a dual primary rear-facing camera assembly in your iPhone 12 mini.
If your rear camera has sensor issues, focusing problems, or shows a blank image, you’ll want to replace this part.
Note: If your photos look like you have a scratched lens, this part will not solve the issue. The lens opening in your rear case may be scratched.
Specifications:
| Part Number |
821-02612, 821-02571 |
|
- True Tone functionality is disabled after a screen replacement, even when using an original Apple screen.
- The combined earpiece speaker and sensor assembly is not included.
- The sensor assembly on the back of the display is paired to your iPhone's logic board and must be transferred from your old display to your new one. The sensor assembly includes the flood illuminator, a part of the Face ID security feature. If it is damaged or replaced, Face ID will cease to function.
|
| Content | iPhone 12/12 mini/12 Pro/12 Pro Max Earpiece Speaker Mesh
Replace punctured or missing mesh covering the earpiece speaker opening in your iPhone 12, iPhone 12 mini, iPhone 12 Pro, or iPhone 12 Pro Max.
Keep dust and dirt from blocking the earpiece speaker.
Note: Installation adhesive is not included. | iPhone 12 mini SIM Card Tray
Replace a scratched or cracked front panel glass digitizer screen or a malfunctioning Super Retina XDR OLED display. This part is compatible with an iPhone 12 mini.
- New parts tested to strict quality standards.
- 100% factory tested for display performance, including luminance and color balance.
- A 5.4 inch OLED multitouch 2340 x 1080 display featuring active-matrix organic light-emitting diode (AMOLED) technology; a significant improvement over more standard liquid crystal displays (LCD). This screen measures up closest to the original OLED display specifications.
A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display. | iPhone 12 Aftermarket Blank Rear Glass Panel
Replace a broken or scratched rear panel with this new blank aftermarket rear panel.
Note:
- The rear-facing camera bezels and lens covers are not included.
- Replacing this panel requires removing the spot welded rear-facing camera bezels.
| iPhone 12 mini Battery
This iPhone 12 mini replacement battery is what you need to bring your dead iPhone back to life!
- Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
- 100% factory tested with a customer return rate of only 1%.
- Assembled using high quality chipset from Texas Instruments.
- Battery adhesive is preinstalled to improve the quality of your repair.
Battery degradation is an inevitable part of the lifespan of your iPhone 12 mini. Extend the life of your phone with this new replacement battery. If your iPhone 12 mini won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.
For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Note: After replacing your battery the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than Battery Health not reporting the health of the battery.
Specifications:
| Battery Model # |
A2471 |
| Watt Hours |
8.57 Wh |
| Voltage |
3.85 V |
| Milliamp Hours |
2227 mAh |
| iPhone 12 mini Rear Camera
Replace a dual primary rear-facing camera assembly in your iPhone 12 mini.
If your rear camera has sensor issues, focusing problems, or shows a blank image, you’ll want to replace this part.
Note: If your photos look like you have a scratched lens, this part will not solve the issue. The lens opening in your rear case may be scratched.
Specifications:
| Part Number |
821-02612, 821-02571 |
| iPhone 12 mini Screen
- True Tone functionality is disabled after a screen replacement, even when using an original Apple screen.
- The combined earpiece speaker and sensor assembly is not included.
- The sensor assembly on the back of the display is paired to your iPhone's logic board and must be transferred from your old display to your new one. The sensor assembly includes the flood illuminator, a part of the Face ID security feature. If it is damaged or replaced, Face ID will cease to function.
|
Reviews
There are no reviews yet.