| Description |
- Protect the display on your iPhone 13, iPhone 13 Pro, or iPhone 14 from impacts and scratches with this precise laser-cut screen protector.
- NuGlas Tempered Glass Screen Protector features an advanced silicone adhesion chemical for easy application, four-tiered layer composition (anti-scratch, oleophobic coating, heat resistance and electrostatic adhesion), so your phone will always be protected.
Each pack contains one set of NuGlas Tempered Glass Screen Protector.
|
- Replace a dual rear-facing camera assembly in your iPhone 14.
- If your rear camera has sensor issues, focusing problems, or shows a blank image, you’ll want to replace this part.
Note: If your photos look like you have a scratched lens, this part will not solve the issue. The lens opening in your rear case may be scratched.
Specifications:
Part Number
821-03851 |
- This iPhone 14 replacement battery is what you need to bring your dead iPhone back to life!
- Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
- 100% factory tested with a customer return rate of only 1%.
- Assembled using high quality chipset from Texas Instruments.
- Battery adhesive is preinstalled to improve the quality of your repair.
- Battery degradation is an inevitable part of the lifespan of your iPhone 14. Extend the life of your phone with this new replacement battery. If your iPhone 14 won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.
- For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Specifications:
Battery Model #
A2863
Watt Hours
12.86 Wh
Voltage
3.87 V
Milliamp Hours
3279 mAh
Manufacturer
Aftermarket
Note:
- After replacing your battery the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider.
- Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider.
- Your phone will function 100% normally other than Battery Health not reporting the health of the battery.
|
- Replace a malfunctioning earpiece speaker in your iPhone 14 and fix problems with phone call audio.
- This is the speaker used to listen while the phone is held to your ear.
Earpiece speaker functions can be affected by water damage, dust ingress, or a blown speaker.
| Fix an unresponsive power button with this replacement flex cable assembly.
Note: The external button face is not included. |
- Replace a torn or malfunctioning front sensor cable in your iPhone 13.
- The Front Sensor Assembly is paired to the logic board in an iPhone 13. This cable contains sensors that are part of the Face ID security feature. Replacing this cable will not restore Face ID functions.
Specifications:
Part Number
821-03149 |
| Content | NuGlas Tempered Glass Screen Protector for iPhone 13/13 Pro/14
- Protect the display on your iPhone 13, iPhone 13 Pro, or iPhone 14 from impacts and scratches with this precise laser-cut screen protector.
- NuGlas Tempered Glass Screen Protector features an advanced silicone adhesion chemical for easy application, four-tiered layer composition (anti-scratch, oleophobic coating, heat resistance and electrostatic adhesion), so your phone will always be protected.
Each pack contains one set of NuGlas Tempered Glass Screen Protector.
| iPhone 14 Rear Camera Assembly
- Replace a dual rear-facing camera assembly in your iPhone 14.
- If your rear camera has sensor issues, focusing problems, or shows a blank image, you’ll want to replace this part.
Note: If your photos look like you have a scratched lens, this part will not solve the issue. The lens opening in your rear case may be scratched.
Specifications:
Part Number
821-03851 | iPhone 14 Battery
- This iPhone 14 replacement battery is what you need to bring your dead iPhone back to life!
- Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
- 100% factory tested with a customer return rate of only 1%.
- Assembled using high quality chipset from Texas Instruments.
- Battery adhesive is preinstalled to improve the quality of your repair.
- Battery degradation is an inevitable part of the lifespan of your iPhone 14. Extend the life of your phone with this new replacement battery. If your iPhone 14 won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.
- For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Specifications:
Battery Model #
A2863
Watt Hours
12.86 Wh
Voltage
3.87 V
Milliamp Hours
3279 mAh
Manufacturer
Aftermarket
Note:
- After replacing your battery the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider.
- Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider.
- Your phone will function 100% normally other than Battery Health not reporting the health of the battery.
| iPhone 14 Earpiece Speaker
- Replace a malfunctioning earpiece speaker in your iPhone 14 and fix problems with phone call audio.
- This is the speaker used to listen while the phone is held to your ear.
Earpiece speaker functions can be affected by water damage, dust ingress, or a blown speaker.
| iPhone 14 Power Button Cable
Fix an unresponsive power button with this replacement flex cable assembly.
Note: The external button face is not included. | iPhone 13 Front Sensor Cable
- Replace a torn or malfunctioning front sensor cable in your iPhone 13.
- The Front Sensor Assembly is paired to the logic board in an iPhone 13. This cable contains sensors that are part of the Face ID security feature. Replacing this cable will not restore Face ID functions.
Specifications:
Part Number
821-03149 |
Reviews
There are no reviews yet.