iPhone 7 Plus Bare Logic Board

iPhone 7 Plus Bare Logic Board

This is only the board to which all the surface soldered components would be mounted.

iPhone 7 Plus Lightning Connector Assembly

Replace a corroded or damaged lightning connector in your iPhone 7 Plus.

iPhone 7/7 Plus Test Cable for Front Camera and Sensors

• This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
• Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
• With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.

iPhone 7 Plus Case Button Set

• This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
• These parts are only the button faces visible on the outside of the case.
• The actual buttons and switch that do all the work are attached to the internal button cables.

iPhone 7 Plus Dual Rear Camera

If the camera assembly has sensor issues, problems focusing, or is malfunctioning, you'll want to replace this part.

Note: If your photos look like you have a scratched lens, this part will not solve the issue. The lens opening in your rear case may be scratched.

iPhone 7 Plus Front Panel Clips

• Replace the set of six retaining clips in the edges of the rear case.
• Set includes two small clips and four large clips.
• These clips help hold the front panel assembly in place.