| SKU | iPhone 7/7 Plus Power and Volume Button Gaskets | iPhone 6s/6s Plus/7/7 Plus Bottom Screws | iPhone 7 Front Panel Clips | iPhone 7/7 Plus Test Cable for Front Camera and Sensors | iPhone 6s/6s Plus/7/7 Plus Backlight Filter | iPhone 7 Front Camera and Sensor Cable | 
| Description | Includes 6 gaskets.
 Replace any or all of this set of six o-ring gaskets for the power or volume button face posts in an iPhone 7 or iPhone 7 Plus. 
Each of the volume button faces and the power button face have two posts that extend to the interior of the phone. Each post has a tiny gasket. That makes six gaskets for one phone or two for each button face.  | All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.
 Includes two replacement screws.  | 
 	- Replace the set of three retaining clips in the edges of the rear case.
 
 	- These clips help hold the front panel assembly in place.
 
  | 
 	- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
 
 	- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
 
 	- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
 
  | Replace a backlight filter on the logic board of the following iPhone models with their component labels: 
 	- iPhone 6s and iPhone 6s Plus
 	- FL4211
 
 	- FL4212
 
 	- FL4213
 
 	- FL4291
 
 	- FL4292
 
 	- FL4293
 
 
 
 	- iPhone 7 and iPhone 7 Plus
 
 
Are you learning to micro solder or starting your own board level repair business? This component is included in the Board Component Bundle. | Replace a front-facing camera and sensor cable in your iPhone 7 and fix problems with front-facing camera images, poor noise cancelling for phone calls, or malfunctioning screen brightness adjustment.
 	- Components of this cable assembly have the part numbers 821-00379 and 821-00514.
 
 
Specifications:
 | 
| Content | iPhone 7/7 Plus Power and Volume Button Gaskets
Includes 6 gaskets.
Replace any or all of this set of six o-ring gaskets for the power or volume button face posts in an iPhone 7 or iPhone 7 Plus. 
Each of the volume button faces and the power button face have two posts that extend to the interior of the phone. Each post has a tiny gasket. That makes six gaskets for one phone or two for each button face.  | iPhone 6s/6s Plus/7/7 Plus Bottom Screws
All iPhone 6s, 6s Plus, 7, and 7 Plus phones have two proprietary 5-point pentalobe screws near the lightning connector to keep anyone other than an Apple technician from opening the phone.
Includes two replacement screws.  | iPhone 7 Front Panel Clips
 
 	- Replace the set of three retaining clips in the edges of the rear case.
 
 	- These clips help hold the front panel assembly in place.
 
  | iPhone 7/7 Plus Test Cable for Front Camera and Sensors
 
 	- This handy test cable makes it easy to check the functions of an iPhone 7 or iPhone 7 Plus front-facing camera and sensor cable assembly without having to complete the installation and close up the iPhone's case.
 
 	- Indispensable to anyone who makes multiple iPhone 7 and iPhone 7 Plus repairs.
 
 	- With this cable installed you can connect, test, and quickly swap multiple replacement front-facing camera and sensor cables without wearing out the delicate press fit connectors on the logic board.
 
  | iPhone 6s/6s Plus/7/7 Plus Backlight Filter
Replace a backlight filter on the logic board of the following iPhone models with their component labels: 
 	- iPhone 6s and iPhone 6s Plus
 	- FL4211
 
 	- FL4212
 
 	- FL4213
 
 	- FL4291
 
 	- FL4292
 
 	- FL4293
 
 
 
 	- iPhone 7 and iPhone 7 Plus
 
 
Are you learning to micro solder or starting your own board level repair business? This component is included in the Board Component Bundle. | iPhone 7 Front Camera and Sensor Cable
Replace a front-facing camera and sensor cable in your iPhone 7 and fix problems with front-facing camera images, poor noise cancelling for phone calls, or malfunctioning screen brightness adjustment.
 	- Components of this cable assembly have the part numbers 821-00379 and 821-00514.
 
 
Specifications:
 | 
Reviews
There are no reviews yet.