iPhone 7/7 Plus/8/8 Plus Replacement Home Button

iPhone 7/7 Plus/8/8 Plus Replacement Home Button

Replace a home button assembly in your iPhone 7/7 Plus/8/8 Plus and fix an unresponsive home button.

iPhone 8 Screen

• New parts tested to strict quality standards.
• 100% factory tested for display performance, including luminance and color balance, digitizer, front camera, and earpiece speaker functionality.

Replace a cracked or scratched front glass panel or malfunctioning LCD display on your phone. A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display.

Note: This black iPhone 8 Screen is compatible with an iPhone SE 2020. These two iPhones use the same display, however the iPhone SE 2020 does not originally have a model with a white screen.

True Tone functionality is disabled after a screen replacement, even when using an original Apple screen.

The Touch ID function will only work with your phone's original home button assembly. This replacement part does not include the home button. You will need to transfer the button assembly from your old display to retain Touch ID.

Specifications:

iPhone 8 Battery

• 100% factory tested with a customer return rate of only 1%.
• Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
• Spot tested by iFixit staff in San Luis Obispo, CA to ensure consistency of quality and capacity.
• Assembled using high quality chipset from Texas Instruments.
• Battery adhesive is preinstalled to improve the quality of your repair.

Battery degradation is an inevitable part of your iPhone's lifespan, extend it with this new replacement battery compatible with 8. If your iPhone 8 won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.

Note: For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.

iPhone 8/8 Plus Test Cable for Lightning Connector

This handy test cable makes it easy to check the functions of a lightning connector assembly without having to complete the installation.

• Indispensable to anyone who makes multiple iPhone 8 or iPhone 8 Plus repairs.
• With this cable installed you can connect, test, and quickly swap multiple replacement lightning connector assemblies without wearing out the delicate press fit connector on the logic board.

iPhone 8/8 Plus/SE 2020 Proximity Sensor Frame

This tiny clear plastic frame is adhered to the back of the front glass panel near the top edge and holds the proximity sensor in place.

iPhone 8/8 Plus Cellular Antenna Connector

• Replace corroded, bent, or missing contact wires with a new antenna cable connector in your iPhone 8 or 8 Plus and save a logic board from e-waste.
• This component is one of 5 cable connectors surface soldered to the lower end of the logic board.