| Description |
- Replace a scratched or cracked front panel glass digitizer screen or a malfunctioning display with this aftermarket LCD screen. This part is compatible with an iPhone 13 mini.
- New parts tested to strict quality standards.
- 100% factory tested for display performance, including luminance and color balance.
- A 5.4 inch In-Cell LCD multitouch display offering an economical option for those trying to save while still wanting a quality product. This screen will be a little darker, the resolution a little lower, and will not have the distinct color of an OLED display.
- A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display.
Note:
- True Tone functionality is disabled after a screen replacement, even when using an original Apple screen.
- The upper sensor assembly is not included.
- The upper sensor cable assembly on the back of the display is paired to your iPhone's logic board and must be transferred from your old display to your new one. The sensor assembly includes the flood illuminator, a part of the Face ID security feature. If it is damaged or replaced, Face ID will cease to function.
Specifications:
Display Panel
Aftermarket In-Cell LCD | Specifications:
| Watt Hours |
5.73 Wh |
| Voltage |
3.8 V |
| Milliamp Hours |
1510 mAh |
| Manufacturer |
Aftermarket |
| Compatible Part Numbers |
616-0667, 616-0668, 616-0669, 616-0730, 616-0762, 661-8300, |
| Replace a damaged or missing exterior button face for the power/lock button, volume buttons, and vibrate/ring switch for the iPhone 5c.
Note: These are just the button parts visible on the outside of the rear case. You will need to transfer the wire hinge from your current power button. The actual buttons and switch that do all the work are attached to the Audio Control and Power Button Cable. If you are experiencing issues with your buttons not working it may actually be the Audio control & Power button cable that's bad. | This iPhone 5s screen replacement includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your repair.
- New parts tested to strict quality standards.
- 100% factory tested for display performance, including luminance and color balance.
Replace a cracked or scratched front glass panel or malfunctioning LCD display on your iPhone 5s. A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display. | Replace a scratched or cracked home button in your iPhone 5 or iPhone 5c.
Keep in mind, this is just a button cover—not the actual actuator that's integrated in the home button cable. So if your home button is not working properly, the button cable is the more likely culprit.
Note: This new part has no square icon in its center. | Replace a malfunctioning earpiece speaker in your iPhone 5s or 1st generation iPhone SE and fix problems with phone call audio.
- This is the speaker used to listen while the phone is held to your ear.
- Earpiece speaker functions can be affected by water damage, dust ingress, or a blown speaker.
|
| Content | iPhone 13 mini Screen
- Replace a scratched or cracked front panel glass digitizer screen or a malfunctioning display with this aftermarket LCD screen. This part is compatible with an iPhone 13 mini.
- New parts tested to strict quality standards.
- 100% factory tested for display performance, including luminance and color balance.
- A 5.4 inch In-Cell LCD multitouch display offering an economical option for those trying to save while still wanting a quality product. This screen will be a little darker, the resolution a little lower, and will not have the distinct color of an OLED display.
- A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display.
Note:
- True Tone functionality is disabled after a screen replacement, even when using an original Apple screen.
- The upper sensor assembly is not included.
- The upper sensor cable assembly on the back of the display is paired to your iPhone's logic board and must be transferred from your old display to your new one. The sensor assembly includes the flood illuminator, a part of the Face ID security feature. If it is damaged or replaced, Face ID will cease to function.
Specifications:
Display Panel
Aftermarket In-Cell LCD | iPhone 5c Battery
This replacement battery is what you need to bring that dead smartphone back to life.
- This battery is brand new! Each one has been tested to confirm that there are no cycles on the cell and that the capacity is 95% or higher.
Note: For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Specifications:
| Watt Hours |
5.73 Wh |
| Voltage |
3.8 V |
| Milliamp Hours |
1510 mAh |
| Manufacturer |
Aftermarket |
| Compatible Part Numbers |
616-0667, 616-0668, 616-0669, 616-0730, 616-0762, 661-8300, |
| iPhone 5c Case Button Set
Replace a damaged or missing exterior button face for the power/lock button, volume buttons, and vibrate/ring switch for the iPhone 5c.
Note: These are just the button parts visible on the outside of the rear case. You will need to transfer the wire hinge from your current power button. The actual buttons and switch that do all the work are attached to the Audio Control and Power Button Cable. If you are experiencing issues with your buttons not working it may actually be the Audio control & Power button cable that's bad. | iPhone 5s Screen
This iPhone 5s screen replacement includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your repair.
- New parts tested to strict quality standards.
- 100% factory tested for display performance, including luminance and color balance.
Replace a cracked or scratched front glass panel or malfunctioning LCD display on your iPhone 5s. A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display.
Note: The Touch ID function will only work with your phone's original home button assembly. This replacement part does not include the home button. You will need to transfer the button assembly from your old display to retain Touch ID. | iPhone 5c Home Button
Replace a scratched or cracked home button in your iPhone 5 or iPhone 5c.
Keep in mind, this is just a button cover—not the actual actuator that's integrated in the home button cable. So if your home button is not working properly, the button cable is the more likely culprit.
Note: This new part has no square icon in its center. | iPhone 5s/SE (1st Gen) Earpiece Speaker
Replace a malfunctioning earpiece speaker in your iPhone 5s or 1st generation iPhone SE and fix problems with phone call audio.
- This is the speaker used to listen while the phone is held to your ear.
- Earpiece speaker functions can be affected by water damage, dust ingress, or a blown speaker.
Note: This is a used OEM part. |
Reviews
There are no reviews yet.