iPhone 13 mini Screen

iPhone 13 mini Screen

• Replace a scratched or cracked front panel glass digitizer screen or a malfunctioning display with this aftermarket LCD screen. This part is compatible with an iPhone 13 mini.
• New parts tested to strict quality standards.
• 100% factory tested for display performance, including luminance and color balance.
• A 5.4 inch In-Cell LCD multitouch display offering an economical option for those trying to save while still wanting a quality product. This screen will be a little darker, the resolution a little lower, and will not have the distinct color of an OLED display.
• A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display.

• True Tone functionality is disabled after a screen replacement, even when using an original Apple screen.
• The upper sensor assembly is not included.
• The upper sensor cable assembly on the back of the display is paired to your iPhone's logic board and must be transferred from your old display to your new one. The sensor assembly includes the flood illuminator, a part of the Face ID security feature. If it is damaged or replaced, Face ID will cease to function.

iPhone 5s/SE (1st Gen) LCD Shield Plate

This shield plate disburses heat and protects the back of the LCD.

Note: This is not the display assembly and does not contain the LCD

iPhone 5c Battery

• This battery is brand new! Each one has been tested to confirm that there are no cycles on the cell and that the capacity is 95% or higher.

• Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
• 100% factory tested with a customer return rate of only 1%.
• Assembled using high quality chipset from Texas Instruments.
• Adhesive is preinstalled to improve the quality of your repair.

Battery degradation is an inevitable part of your iPhone 5s’s lifespan. Extend the life of your phone with this new replacement battery compatible with iPhone 5s. If your iPhone 5s won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.

Note: For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.

Specifications:

iPhone 5s Rear Camera

If your rear camera has sensor issues, focusing problems, or shows a blank image, you’ll want to replace this part.

Note: If you have a scratched lens in the rear case, this part will not solve your issue.

Specifications:

iPhone 5s/SE (1st Gen) Nano SIM Card Tray