| Description |
- Protect the display on your iPhone 13, iPhone 13 Pro, or iPhone 14 from impacts and scratches with this precise laser-cut screen protector.
- NuGlas Tempered Glass Screen Protector features an advanced silicone adhesion chemical for easy application, four-tiered layer composition (anti-scratch, oleophobic coating, heat resistance and electrostatic adhesion), so your phone will always be protected.
Each pack contains one set of NuGlas Tempered Glass Screen Protector.
|
- Replace the two external lens covers for the rear-facing cameras compatible with an iPhone 13 or iPhone 13 mini.
- Installation adhesive is included.
Note: Only the lens cover glass is included. The lens cover bezels and rings are not included. |
- This iPhone 13 replacement battery is what you need to bring your dead iPhone back to life!
- Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
- 100% factory tested with a customer return rate of only 1%.
- Assembled using high quality chipset from Texas Instruments.
- Battery adhesive is preinstalled to improve the quality of your repair.
- Battery degradation is an inevitable part of the lifespan of your iPhone 13. Extend the life of your phone with this new replacement battery. If your iPhone 13 won't turn on, is stuck in a boot loop, has a "service
- battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it
- For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Note: After replacing your battery the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than Battery Health not reporting the health of the battery. | Replace a torn or malfunctioning front sensor cable in your iPhone 14.
Note: The Front Sensor Assembly is paired to the logic board in an iPhone 14. This cable contains sensors that are part of the Face ID security feature. Replacing this cable will not restore Face ID functions. | This cable connects the internal volume buttons, and vibrate/ring switch to the logic board.
Note: The external button covers are not included. |
- Replace a broken or scratched rear panel with this new blank aftermarket rear panel.
- This black rear glass panel matches the color of a "midnight" iPhone 13.
Note:
- The rear-facing camera bezels and lens covers are not included.
- Installation adhesive is not included.
- Replacing this panel requires removing the spot welded rear-facing camera bezels.
|
| Content | NuGlas Tempered Glass Screen Protector for iPhone 13/13 Pro/14
- Protect the display on your iPhone 13, iPhone 13 Pro, or iPhone 14 from impacts and scratches with this precise laser-cut screen protector.
- NuGlas Tempered Glass Screen Protector features an advanced silicone adhesion chemical for easy application, four-tiered layer composition (anti-scratch, oleophobic coating, heat resistance and electrostatic adhesion), so your phone will always be protected.
Each pack contains one set of NuGlas Tempered Glass Screen Protector.
| iPhone 13/13 mini Rear Camera Lens Covers
- Replace the two external lens covers for the rear-facing cameras compatible with an iPhone 13 or iPhone 13 mini.
- Installation adhesive is included.
Note: Only the lens cover glass is included. The lens cover bezels and rings are not included. | iPhone 13 Battery
- This iPhone 13 replacement battery is what you need to bring your dead iPhone back to life!
- Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
- 100% factory tested with a customer return rate of only 1%.
- Assembled using high quality chipset from Texas Instruments.
- Battery adhesive is preinstalled to improve the quality of your repair.
- Battery degradation is an inevitable part of the lifespan of your iPhone 13. Extend the life of your phone with this new replacement battery. If your iPhone 13 won't turn on, is stuck in a boot loop, has a "service
- battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it
- For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Battery Model #
A2655
Watt Hours
12.41 Wh
Voltage
3.84 V
Milliamp Hours
3227 mAh
Note: After replacing your battery the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than Battery Health not reporting the health of the battery. | iPhone 14 Front Sensor Cable
Replace a torn or malfunctioning front sensor cable in your iPhone 14.
Note: The Front Sensor Assembly is paired to the logic board in an iPhone 14. This cable contains sensors that are part of the Face ID security feature. Replacing this cable will not restore Face ID functions. | iPhone 14 Audio Control Cable and Brackets
This cable connects the internal volume buttons, and vibrate/ring switch to the logic board.
Note: The external button covers are not included. | iPhone 13 Aftermarket Blank Rear Glass Panel
- Replace a broken or scratched rear panel with this new blank aftermarket rear panel.
- This black rear glass panel matches the color of a "midnight" iPhone 13.
Note:
- The rear-facing camera bezels and lens covers are not included.
- Installation adhesive is not included.
- Replacing this panel requires removing the spot welded rear-facing camera bezels.
|
Reviews
There are no reviews yet.