iPhone 7 Plus Earpiece Speaker Gasket

iPhone 7 Plus Earpiece Speaker Gasket

Replace the gasket that seals the earpiece speaker mesh bracket assembly against the back of the earpiece speaker in your iPhone 7 Plus.

iPhone 7 Plus Front Panel Clips

• Replace the set of six retaining clips in the edges of the rear case.
• Set includes two small clips and four large clips.
• These clips help hold the front panel assembly in place.

iPhone 7/7 Plus Hold Switch Gasket

Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus. This gasket fits around the body of the hold button assembly.

iPhone 7 Plus Wi-Fi Diversity Antenna

This Wi-Fi Diversity and cable is adhered to the loudspeaker in the lower right corner inside the rear case.

Specifications:

iPhone 7/7 Plus Test Cable for Home Button

• This handy test cable makes it easy to check the function of a home button assembly without having to complete the installation.
• Indispensable to anyone who makes multiple iPhone 7 and 7 Plus repairs.
• With this cable installed in an iPhone 7 or 7 Plus body you can connect, test, and quickly swap multiple replacement home button assemblies without wearing out the delicate press fit connector on the logic board.

iPhone 7 Plus Case Button Set

• This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
• These parts are only the button faces visible on the outside of the case.
• The actual buttons and switch that do all the work are attached to the internal button cables.