| Description |
- Replace a punctured or missing mesh covering the earpiece speaker opening compatible with an iPhone 13, 13 mini, 13 Pro, 13 Pro Max, 14, 14 Plus, 14 Pro, or 14 Pro Max.
- Keep dust and dirt from blocking the earpiece speaker.
Note: Installation adhesive is not included. | Replace a lightning connector, flex cable, and dual microphones in your iPhone 14.
If your phone isn't charging, has connectivity problems, is not recognized when plugged into your computer via USB, or has trouble recording audio, this part could fix the problem.
Specifications:
Part Number
821-03758 |
- Replace a dual rear-facing camera assembly in your iPhone 14.
- If your rear camera has sensor issues, focusing problems, or shows a blank image, you’ll want to replace this part.
Note: If your photos look like you have a scratched lens, this part will not solve the issue. The lens opening in your rear case may be scratched.
Specifications:
Part Number
821-03851 |
- This iPhone 13 replacement battery is what you need to bring your dead iPhone back to life!
- Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
- 100% factory tested with a customer return rate of only 1%.
- Assembled using high quality chipset from Texas Instruments.
- Battery adhesive is preinstalled to improve the quality of your repair.
- Battery degradation is an inevitable part of the lifespan of your iPhone 13. Extend the life of your phone with this new replacement battery. If your iPhone 13 won't turn on, is stuck in a boot loop, has a "service
- battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it
- For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Note: After replacing your battery the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than Battery Health not reporting the health of the battery. | Replace a torn or missing Wi-Fi Antenna in your iPhone 14 smartphone. Fix unreliable connectivity to Wi-Fi devices.
Specifications:
Part Number
821-03966 | Replace the mesh covers for the speaker, vent, and microphone openings in an iPhone 13, iPhone 13 Pro, or iPhone 13 Pro Max.
|
| Content | iPhone 13/14 Earpiece Speaker Mesh
- Replace a punctured or missing mesh covering the earpiece speaker opening compatible with an iPhone 13, 13 mini, 13 Pro, 13 Pro Max, 14, 14 Plus, 14 Pro, or 14 Pro Max.
- Keep dust and dirt from blocking the earpiece speaker.
Note: Installation adhesive is not included. | iPhone 14 Lightning Connector Assembly
Replace a lightning connector, flex cable, and dual microphones in your iPhone 14.
If your phone isn't charging, has connectivity problems, is not recognized when plugged into your computer via USB, or has trouble recording audio, this part could fix the problem.
Specifications:
Part Number
821-03758 | iPhone 14 Rear Camera Assembly
- Replace a dual rear-facing camera assembly in your iPhone 14.
- If your rear camera has sensor issues, focusing problems, or shows a blank image, you’ll want to replace this part.
Note: If your photos look like you have a scratched lens, this part will not solve the issue. The lens opening in your rear case may be scratched.
Specifications:
Part Number
821-03851 | iPhone 13 Battery
- This iPhone 13 replacement battery is what you need to bring your dead iPhone back to life!
- Tested to confirm there are no cycles on the cell and the capacity is 95% or higher.
- 100% factory tested with a customer return rate of only 1%.
- Assembled using high quality chipset from Texas Instruments.
- Battery adhesive is preinstalled to improve the quality of your repair.
- Battery degradation is an inevitable part of the lifespan of your iPhone 13. Extend the life of your phone with this new replacement battery. If your iPhone 13 won't turn on, is stuck in a boot loop, has a "service
- battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it
- For optimal performance, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Battery Model #
A2655
Watt Hours
12.41 Wh
Voltage
3.84 V
Milliamp Hours
3227 mAh
Note: After replacing your battery the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than Battery Health not reporting the health of the battery. | iPhone 14 Wi-Fi Antenna
Replace a torn or missing Wi-Fi Antenna in your iPhone 14 smartphone. Fix unreliable connectivity to Wi-Fi devices.
Specifications:
Part Number
821-03966 | iPhone 13/13 Pro/13 Pro Max Speaker Mesh Set
Replace the mesh covers for the speaker, vent, and microphone openings in an iPhone 13, iPhone 13 Pro, or iPhone 13 Pro Max.
|
Reviews
There are no reviews yet.