iPhone 7/7 Plus Power and Volume Button Gaskets

iPhone 7/7 Plus Power and Volume Button Gaskets

Replace any or all of this set of six o-ring gaskets for the power or volume button face posts in an iPhone 7 or iPhone 7 Plus.

Each of the volume button faces and the power button face have two posts that extend to the interior of the phone. Each post has a tiny gasket. That makes six gaskets for one phone or two for each button face.

iPhone 7 Wi-Fi Diversity Antenna

This Wi-Fi antenna and cable is adhered to the loudspeaker in the lower right corner inside the rear case.

Specifications:

iPhone 7 Case Button Set

• This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch for replacing buttons with cosmetic troubles.
• These are the button parts visible on the outside of the case.
• The actual buttons and switch that do all the work are attached to the internal button cables.

iPhone 7 Bare Logic Board

• This is only the board to which all the surface soldered components would be mounted.
• There are two revision numbers for this logic board. This board is 820-00188-A.

iPhone 7/7 Plus Power/Volume Button Retaining Clips

• Replace the internal clips that hold the external button covers in place.
• These clips snap over the posts on the inside of the power and volume button covers, preventing the button covers from falling out of the iPhone's case.
• Set of three clips.

iPhone 7 Top Left Antenna

Replace a torn or missing antenna contact assembly in the top left of the rear case of your iPhone 7 and fix cellular connectivity problems.